Call Us: (888) 413-8900

Help Request a Quote Comparision

HP DL160 G6 1U

HP DL160 G6 1U

The HP ProLiant DL160 G6 is ideal for high density performance computing, memory intensive applications, and scale-out computing.

Form Factor 1U rackmount server

Six Core Intel® Xeon® 5600 ,Quad-Core Intel® Xeon® 5600 & Quad-Core Intel® Xeon® 5500 series processors (supports up to two)

Chipset: Intel® 5520 Chipset
Memory Type: PC3-10600R (DDR3-1067) Registered Memory
PC3-10600E (DDR3-1067) Unbuffered Memory
Maximum Memory: 192GB
Memory Slots:

18 DIMMs

Internal Drive Support: 4 or 8 Drive Bays depending on Model.
-Up to 4 Non-hot plug SATA 3.5" drives
-Up to 4 Hot plug SAS/SATA 3.5" drives
-Up to 8 Hot plug SAS/SATA 2.5" drives
Network Controller: Two embedded NC105i PCIe Gigabit Server Adapters
Storage Controller:

Non-Hot Plug and Cold Plug SATA Models:
- HP Smart Array B110i SATA RAID
NOTE: Embedded SATA controller support transfer rate up to 3Gb/s
NOTE: To enable RAID for embedded SATA controller, use EZ set-up CD to download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart Start, EZSetup CD. For more information on SW Smart Array, go to:
NOTE: A diskette drive or virtual FDD using LO100 Advanced Pack is needed to install storage controller drivers during a Windows operating system installation from a CD.
NOTE: The addition of a Smart Array hardware based storage controller to a Non-Hot Plug SATA Model is only supported for external storage.
NOTE: Non VMware Support for software RAID. A Smart Array controller with hw RAID must be used to support ESX.
NOTE: To enable Hot plug functionality , use HP Smart Array Hot Plug Advance Pack for B110i (PN TC421A)

Hot Plug SATA/SAS Models:
- HP Smart Array P410 Controller (RAID 0/1/1+0)
NOTE: Support transfer rate up to 6Gb/s SAS or 3Gb/s SATAHP Smart Array P410 Controller 256 BBWC (RAID/0/1/1+0/5/5+0)
NOTE: Support transfer rate up to 6Gb/s SAS or 3Gb/s SATA

Expansion Slots:

-Slot 1: full-length/full-height PCI-Express 2.0 x16
-Slot 2: low-profile/internal only PCI-Express 2.0 x8
*In order to access expansion slot #2, the low profile internal only slot, expansion slot #1 may only be populated with a half length, full height form factor card.

Embedded Systems Management :

HP LO100 with Optional LO100 Advanced Licenses for Virtual KVM and Virtual Media.

-Embedded IPMI standard reporting 
System event log access
-Remote Serial console (serial redirection)
-Browser, Telnet access
-SMASH-CLP compliant
-IPMI 2.0 compliant
-Secure Socket Layer Encryption
-Secure Shell Encryption
-Virtual media (Floppy, CD, USB 2.0) with Advanced License
-Virtual KVM with Advanced License

USB Ports: Five USB Ports (two front, one internal, two rear)
Optical Drive: Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
Power Supply: 500 Watts, auto-switching, high efficiency, PFC (Power Factor Correcting)
NOTE: Factory upgradeable to high-efficiency hot plug common slot or redundant hot-plug power supply.
Deployment/Serviceability: -Tool-less access to all system components for easy in rack serviceability
-Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
Operating Systems and Virtualization Software Support for ProLiant Servers: Microsoft Windows Server
Oracle Solaris 
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Citrix Essentials for XenServer (Retail)

Items (Showing 0 to 0 of 0 Total)


There are no products to list in this category.