Call Us: (888) 413-8900

Help Request a Quote Comparision

HP DL160 G5 1U

HP DL160 G5 1U

The HP ProLiant DL160 G5 is ideal for high density performance computing, memory intensive applications, and scale-out computing.

Form Factor 1U rackmount server
Processor

Supports up to two Intel® Quad-Core 5400 or Dual-Core 5200 sequence processors
-Quad-Core Intel® Xeon® processors 5400 sequence with 12 MB Level 2 cache
-Dual-Core Intel® Xeon® processors 5200 sequence with 6 MB Level 2 cache

Intel® 5400 Chipset

Memory: Supports up to 64 GB of PC2-5300 (DDR2-667) and up to 32 GB of PC2-6400 (DDR2-800) fully buffered DIMMs (DDR2-667) with Advanced ECC
Internal Drive Support: -Support for up to four 3.5" Non-Hot plug serial ATA (SATA) hard drives or;
-Support for up to four 3.5" Hot plug Serial Attached SCSI (SAS) or SATA hard drives.
-NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
-Internal storage capacity of up to 1.0TB (4 x 1TB Hot Plug 3.5" SATA), 3.0TB (4 x 750 Non-Hot Plug SATA) or 4.0TB (4 x 1TB Hot Plug 3.5" SAS)
Network Controller: Two embedded NC105i PCIe Gigabit Server Adapters
Storage Controller: -Non-Hot Plug SATA Models: HP Embedded SATA RAID Controller
NOTE: Transfer rate: 1.5 Gb/s SATA
-Hot Plug SAS/SATA Models: HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. 
NOTE: Transfer rate: 1.5 Gb/s SATA, 3Gb/s SAS
Expansion Slots:

Non-Hot Plug Models: Two available PCI Express 2.0 slots:
-Slot 1: full-length/full-height PCI-Express 2.0 x16
-Slot 2: low-profile/half-height PCI-Express 2.0 x16

Hot Plug Models: One available PCI-Express slot:
-Slot 1: full-length/full-height PCI-Express 2.0 x16
-Slot 2: low-profile/half-height PCI-X slot populated by the SAS/SATA storage controller

Infrastructure Management:

-HP Lights Out 100i Advanced Remote Management with new licensed key activated upgrades for Virtual KVM and virtual media support. LO100i management support for the DL160 G5 includes:
-IPMI 2.0 & SMASH CLP support
-ROM Setup Utility
-Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer speeds and DVD-ROM support plus simplified virtual media (floppy and CD with no FTTP server requirements)
-Enhanced browser interface and embedded KVM over IP provides OS-independent remote graphical console

USB Ports: Five USB ports (two front, one internal, two rear)
Optical Drive: Support for one (optional): DVD-ROM, DVD/CD RW
Power Supply: -650W Power Supply (Non-Hot Plug, Autoswitching)
-Optional high-efficiency model
-NOTE: Optional high-efficiency model requires the purchase of HP Power Supply Backplane (453652-B21)
Additional Features: Support for:
-NVIDIA Quadro FX3700 512MB PCIe x 16 graphics card
-NVIDIA Quadro FX1700 512MB PCIe x 16 graphics card
Deployment/Serviceability: -Tool-less access to all system components for easy in rack serviceability
-Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
Power Supply: 650 Watts, auto-switching, PFC (Power Factor Correcting); non-redundant, non-hot-plug
Operating Systems and Virtualization Software Support for ProLiant Servers: Microsoft Windows Server
Microsoft Windows Server Hyper V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris 10 for x86/x64 based Systems

Items (Showing 0 to 0 of 0 Total)

Show

There are no products to list in this category.