|
Form Factor
|
2U rack height |
|
Processors |
Up to two Quad-Core Intel Xeon 5300 sequence processors at up to 3.0GHz; Up to two Quad-Core Intel Low Volt Xeon 5300 sequence processors at up to 2.0 GHz; Up to two Dual-Core Intel Xeon 5100 sequence processors at up to 3.0GHz; Up to two Dual-Core Intel Low Volt Xeon 5100 sequence processors at 2.33GHz; or Up to two Dual-Core Intel Xeon 5000 sequence processors at up to 3.0GHz |
|
Processor Sockets
|
2 |
|
Front Side Bus or HyperTransport
|
Intel Xeon 5300 Sequence: Dual Independent 1066MHz or 1333MHz; Intel Xeon 5100 Sequence: Dual Independent 1066MHz or 1333MHz; Intel Xeon 5000 Sequence: Dual Independent 667MHz |
|
Cache
|
Intel Xeon 5300 Sequence: 2x4MB; Intel Xeon 5100 Sequence: 4MB; Intel Xeon 5000 Sequence: 2x2MB |
|
Chipset
|
Intel 5000X |
|
Memory
|
Up to 32GB (8 FBD DIMM slots): 256MB/512MB/1GB/2GB/4GB Fully Buffered DIMMs (FBD) in matched pairs, 533MHz or 667MHz |
|
I/O Slots
|
Three PCI slots, either PCIe riser with three PCI Express slots (one x4 (x8 connector) and two x8) or two PCI-X 64-bit/133MHz and one PCI Express x8 slot |
| Drive controller |
4 port SAS 5/i integrated SAS controller (no RAID) |
|
RAID Controller
|
Optional PERC 5/i integrated SAS/SATA daughtercard controller with 256MB cache,PERC 4e/DC, PERC 5/e adapter |
|
Drive Bays
|
3 hard drive base options: 8 x 2.5" Hard Drive Option: 2.5" HD Option: up to 8 SAS HDs (10K); 4 x 3.5" Hard Drive Option: 3.5" HD Option: up to 4 SAS (10K/15K) or SATA (7.2K) drives; 6 x 3.5" Hard Drive Option: 3.5" HD Option: up to 6 SAS (10K/15K) or SATA (7.2K) drives; Peripheral bay options; Floppy Drive, DAT72 Tape Drive (not available with 6 x 3.5" hard drive base); Slim optical drive bay with choice of CD-ROM, DVD-ROM or Combo CD-RW/DVD-ROM |
|
Maximum Internal Storage
|
Up to 4.5TB: six 750GB hot-plug SATA (7.2 K RPM) |
|
Hard Drives
|
2.5" SAS (10K RPM): 36GB, 73GB; or 3.5" SAS (10K RPM): 73GB, 146GB, 300GB, or 400GB; or 3.5" SAS (15K RPM): 36GB, 73GB, 146GB; or 3.5" SATA (7.2K RPM): 80GB, 160GB, 250GB, 500GB, 750GB SATAu |
| External storage |
SAS, SCSI and fibre channel storage systems |
| Tape backup options |
Internal: PV100T (DAT 72) with multibay
External: PowerVault DAT 72, 110T, 114T, 122T, 124T, 132T, 136T, 160T and ML6000 |
| Network interface card |
Dual embedded Broadcom® NetXtreme II™ 5708 Gigabit 2 Ethernet NIC with fail-over and load balancing. TOE (TCPIP Offload Engine) supported on Microsoft Windows Server 2003, SP1 or higher with Scalable Networking Pack |
|
Power supply
|
AC configuration with standard single or redundant 750W hot-plug auto-switching universal 110/220V AC power supplies DC configuration with redundant hot plug -48 to -60 V20 A DC power supplies |
| Availability |
ECC FBD memory, SDDC, Spare Bank; hot-plug hard drives; optional hot-plug redundant power supplies; dual embedded NICs with failover and load balancing support; optional PERC5/i integrated daughtercard controller with battery-backed cache; hot-plug redundant cooling; tool-less chassis; fibre and SCSI cluster support; validated for Dell/EMC SAN |
Video
|
Embedded ATI ES1000 with 16MB memory |
Remote management
|
Standard Baseboard Management Controller with IMPI 2.0 support; optional DRAC5 for advanced capabilities |
| Systems management |
Dell OpenManage™ |
| Rack support |
4-post (Dell rack), 2-post and 3rd party Versa rails, sliding rails and Cable Management Arm |
|
Operating Systems
|
Microsoft® Windows Server 2003 R2, Standard, Enterprise and Web Edition, x64, Standard and Enterprise Edition; Microsoft® Windows® Storage Server 2003 R2, Workgroup, Standard, Enterprise Edition; Red Hat® Linux® Enterprise v4, ES and ES EM64T; SUSE Linux Enterprise Server 9 EM64T |